CE800
B
User Manual
32
5. Make sure both units are connected by the Cat 5e cable, then plug in the
Remote unit’s power adapter.
6. Press and hold the Local unit’s
Selection
button, then plug in the Local
unit’s power adapter.
7. Wait until both green front panel LEDs on the Local unit are flashing on
and off, then release the
Selection
button.
8. Make sure the orange LED on the front panel of the Remote unit is on
(indicating that
Firmware Upgrade Mode
is in effect.
Note:
If the LED is not on, or it is blinking, the unit is not ready to be
upgraded. You must repeat steps 6 and 7.
