ATEN CE750A, Руководство пользователя, Страница: 21 / 36

Chapter 2. Hardware Setup
13
Setting Up
Setting up the CE750A USB KVM Extender system is simply a matter of
plugging in the cables. Make sure that all the equipment to be connected up is
powered Off. Refer to the installation diagram on the following page and do the
following:
1. Plug the cables from the local console devices (mouse, keyboard, monitor,
microphone, speakers) into their ports on the Console section on the rear
of the Local Unit (CE750AL). Each port is marked with an appropriate
icon to indicate itself.
2. Plug the appropriate connectors on the custom KVM cable set supplied
with this unit into their ports on the CPU section on the front of the Local
Unit (CE750AL).
3. Plug the connectors on the other end of the custom KVM cable set into the
appropriate ports on the local computer. Each connector is marked with an
appropriate icon to indicate which it is.
Note: If you are combining the CE750A with a KVM switch, the other end
of the custom KVM cable set plugs into the appropriate ports on the
KVM switch.
4. For control of serial devices, connect the RS-232 serial port on the local
unit to a serial port on the local computer.
5. Plug either end of the Cat 5e cable into the CE750AL's Remote I/O port.
Plug the other end of the Cat 5e cable into the I/O port of the Remote Unit
(CE750AR).
6. Plug one of the power adapters (supplied with this package) into an AC
source; plug the adapter's power cable into the CE750AL's Power Jack
7. Plug the cables from the remote console devices (mouse, keyboard,
monitor, speakers. microphone), into their ports on the Console side of the
CE750AR.
8. Plug the second power adapter (supplied with this package) into an AC
source; plug the adapter's power cable into the CE750AR's Power Jack.
ce750a.book Page 13 Monday, January 7, 2019 8:01 PM