ATEN CE750A, Руководство пользователя, Страница: 11 / 36

Chapter 1. Introduction
3
Requirements
Consoles
Š A VGA, SVGA, SXGA, UXGA, or multisync monitor capable of the
highest resolution that you will be using on any computer in the
installation*
Š A USB keyboard**
Š A USB mouse***
Note: 1. If you connect a DDC type monitor to the Local Unit, the monitor
that connects to the Remote Unit must be able to support the
highest video resolution that the DDC monitor can provide
2. You can use different brands and models of USB keyboard on the
Local and Remote Units, but support for multi-function
keyboards is limited to the standard 104 keys.
3. You can use different brands and models of mouse on the Local
and Remote Units, but only the left and right mouse buttons and
scroll wheel features are supported. Other mouse features are not
supported.
Computers
The following equipment must be installed on each computer that is to be
connected to the system:
Š A VGA, SVGA, SXGA, UXGA, or multisync card.
Š USB host controller and Type A USB port.
Cables
Š For optimal signal integrity, and to simplify the layout, we strongly
recommend that you use the high quality custom KVM cable set that is
provided with this package.
Š Cat 5e cable is the minimum required to connect the Local and Remote
CE750A Units. Cable of a lower standard will result in degrading of the
video signal. For best performance, we strongly recommend Cat 5e cable.
ce750a.book Page 3 Monday, January 7, 2019 8:01 PM