
CE680 / CE690 User Manual
18
Firmware Upgrade
in Chapter 5 for a step-by-step guide
on upgrading the firmware. In summary, do the following steps:
1. Push and hold the
Operation Mode
pushbutton and power on the Local or
Remote unit to enter the firmware upgrade mode.
2. Connect a computer to the RS-232 port of the local/remote unit.
3. Use ATEN Firmware upgrade utility to do the firmware upgrade.
Note:
Do these steps for the Local and Remote units individually (
, page 26). To upgrade the units together, see
Wake Up PC
When at the remote console’s location and you want to wake a computer on the
local site, use the
Wakeup PC
pushbutton on the front panel of the CE680R /
CE690R.
Make sure to use an RS-232 cable to connect the local computer to the CE680L
/ CE690L in order for this command to work.
Note:
The PC’s BIOS should support RS-232 wake up function.
CE680R / CE690R