ATEN CE680, Руководство пользователя, Страница: 13 / 46

Chapter 1. Introduction
5
Components
CE680L / CE690L (Local Unit) Front View
No. Component Description
1 KVM Port Use the Custom KVM cable supplied with this unit:
Š
DVI Input port: The DVI connector of the provided
Custom KVM cable that connects to your computer
plugs into this port.
Š
USB Port (for Keyboard / Mouse) : The USB Type
B connector of the provided Custom KVM cable that
connects to your computer plugs into this port.
Š
Audio Ports (Speakers / Mic) : These mini stereo
ports are for the speakers (green) and microphone
(pink) connectors of the provided Custom KVM
cable that connects to your computer.
2 RS-232 Serial Port Connect the RS-232 cable from your computer into
this port.
3 USB Type B Port Connect the USB cable from your computer to this port
if using a touchscreen panel device.
4 Operation Mode
Pushbutton The Auto / Local pushbutton toggles between the
Operating Modes available from the Local Console.
Š
Auto – both the Local and Remote Consoles can
control the system.
Š
Local – only the Local Console can control the
system(s).
The default operating mode is Auto .
You can also use this button to enable the Firmware
Upgrade Mode. Reset the power to proceed with the
firmware upgrade. See page 25 for full details.
5 LEDs The CE680L / CE690L has two LEDs to indicate the
operating status. See page 17 for full details.
1 3
2
4
5