Chapter 4. Local Console Operation
43
(Continued from previous page.)
4. After you have made your selection(s), Click
Next
to perform the upgrade.
If you enabled
Check Firmware Version
, the Utility compares the
device's firmware level with that of the upgrade files. If it finds that the
device's version is higher than the upgrade version, it brings up a
dialog box informing you of the situation and gives you the option to
Continue or Cancel:
.
If you didn't enable
Check Firmware Version
, the Utility installs the
upgrade files without checking whether they are a higher level, or not.
As the Upgrade proceeds status messages appear in the Status
Messages panel, and the progress toward completion is shown on the
Progress
bar.
To abort the upgrade procedure before it completes, click
Cancel
.
If you cancel before completion, a dialog box appears warning you that
quitting at this point may cause the device’s firmware to be lost, and
you are given the option to proceed or abort the cancel operation.
To recover from a “lost firmware” situation, see
kh15816i.book Page 43 Wednesday, December 26, 2007 11:12 AM
