erase more than one SUB press DEL then SUB, type the number of the first SUB you want
to remove, press THRU, type the number of the last SUB you want to remove and
complete the delete by double pressing ENTER.
e.g You wish to remove 5-8 SUB you press:
DEL - SUB – 5 THRU 8 – ENTER
RECORD SEQUENCE SCENES
In order to record a sequence scene press PAGE and then BACK button. On you screen
appears PAGE START 1. Regulate the potentiometers as you wish (if you need more than
24 channels press GO and channels 25 to 48 appear on the display, if you press GO
another the next 49 to 72 channels appear; you can use as much channels you need).
When the first sequence scene is completed press REC then SEQ and the SEQ number.
Press POINT button to set the step (e.g step 1) and then press ENTER. On the screen
appears TIME UP, type the anode time you wish, press ENTER then TIME DOWN
appears, set the cathode time and press ENTER. Last set the FOLLOW time and press
ENTER.
In every sequence scene you can record 1 to 100 steps following the instructions above.
e.g For the next step (step 2) press :
REC – SEQ – POINT , on the screen you see step 2, regulate the potentiometers as you
wish, set the anode, cathode and follow time and press ENTER.
EDIT SEQUENCE SCENES
To edit a sequence scene press EDIT then SEQ then the SEQ number you wish to edit
(e.g 1). On the screen you see the message “SEQ 1 step 1”. You can chose which step
you want to edit by pressing POINT button. Regulate the potentiometers as you wish and
then press REC and ENTER. To complete the editing set anode, cathode and follow time
and press ENTER.
DELETE SEQUENCE SCENES
To delete a sequence scene press DEL then SEQ then the SEQ number you wish to erase
(e.g 4) and press POINT button. You see the message “Delete SEQ 4 step 1”, press DEL
and then “Delete SEQ 4 ALL?” appears on screen. Press ENTER to delete the complete
SEQ 4 or double press ESC to cancel the delete. If you wish too delete specific steps of
the SEQ and not the whole one when the message “Delete SEQ 4 step 1” appears press
POINT button and type the number of the step you want to delete.
RECORD CHASER
To record a CHASER press PAGE CHAN and then BACK. On display appears PAGE
SATRT 1. Regulate the potentiometers as you wish (if you need more than 24 channels
press GO and channels 25 to 48 appear on the display, if you press GO another the next
49 to 72 channels appear; you can use as much channels you need). When the first
chaser is completed press REC then CHASER type the number of this chaser and last
press POINT.
On the screen you see step, you type the step you want and complete the recording
pressing ENTER. You can record up to 12 chasers without any step limit.
EDIT CHASER STEPS
