background image

101520-007   REV D 

SPELLMAN HIGH VOLTAGE ELECTRONICS 

WARRANTY

 

Spellman

 High Voltage Electronics 

(“Spellman”)

 warrants that all power supplies it manufactures will be 

free from defects in materials and factory workmanship, and agrees to repair or replace, without charge, any 
power supply that under normal use, operating conditions and maintenance reveals during the warranty 
period a defect in materials or factory workmanship.   The warranty period is twelve (12) months from the 
date of shipment of the power supply. With respect to standard SL power supplies (not customized) the 
warranty period is thirty-six (36) months from the date of shipment of the power supply. 

 

This warranty does not apply to any power supply that has been: 

 

Disassembled, altered, tampered, repaired or worked on by persons unauthorized by 

Spellman;

 

 

subjected to misuse, negligent handling, or accident not caused by the power supply; 

 

installed, connected, adjusted, or used other than in accordance with the original intended application and/or 
instructions furnished by 

Spellman.

 

 

THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING 
THOSE OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  

 

The buyer’s sole remedy for a claimed breach of this warranty, and 

Spellman’s 

sole liability is limited, at 

Spellman’s

 discretion, to a refund of the purchase price or the repair or replacement of the power supply at 

Spellman’s

 cost.   The buyer will be responsible for shipping charges to and from 

Spellman’s

 plant.   The 

buyer will not be entitled to make claim for, or recover, any anticipatory profits, or incidental, special or 
consequential damages resulting from, or in any way relating to, an alleged breach of this warranty. 

 

No modification, amendment, supplement, addition, or other variation of this warranty will be binding unless 
it is set forth in a written instrument signed by an authorized officer of 

Spellman. 

 

 

Factory Service Procedures 

 

For an authorization to ship contact 

Spellman’s

 Customer Service Department. Please state the model and 

serial numbers, which are on the plate on the rear panel of the power supply and the reason for return.  A 
Return Material Authorization Code Number (RMA number) is needed from 

Spellman

 for all returns.  The 

RMA number should be marked clearly on the outside of the shipping container. Packages received without 
an RMA Number may delay return of the product. The buyer shall pay shipping costs to and from 

Spellman

.  

Customer Service will provide the Standard Cost for out-of-warranty repairs.  A purchase order for this 
amount is requested upon issuance of the RMA Number (in-warranty returns must also be accompanied by 
a “zero-value” purchase order).  A more detailed estimate may be made when the power supply is received 
at 

Spellman.

  In the event that the cost of the actual repair exceeds the estimate, 

Spellman

 will contact the 

customer to authorize the repair.

 

 

Factory Service Warranty 

 

Spellman

 will warrant for three (3) months or balance of product warranty, whichever is longer, the repaired 

assembly/part/unit. If the same problem shall occur within this warranty period 

Spellman

 shall undertake all 

the work to rectify the problem with no charge and/or cost to the buyer. Should the cause of the problem be 
proven to have a source different from the one that has caused the previous problem and/or negligence of 
the buyer, 

Spellman

 will be entitled to be paid for the repair. 

 

Spellman Worldwide Service Centers 

 
For a complete listing of Spellman’s Global Service facilities please go to:  
http://www.spellmanhv.com/customerservice/service.asp 
 

Содержание Spellman SL150kV




































Отзывы: