Atek ALC 77-C, Руководство пользователя, Страница: 9 / 19

Out1 and out2 menus allow positions of the relays. The relay is inactive at Nclose option, active while
reached set point. And also yhe delay is active at Nopen option; it will be inactive while reached set point.
Provides accurate display of sensors with different resolutions by entering the multiplier value.
By way of example, 0,025 constant value is entered to Const Menu for the 25 micron-sensor or 0,005
constant value for 5 micron-sensor. So when sensor moves 100mm, value of 100 is displayed on the
screen.
In order to set to Conts Menu, pressed to prg button while operating mode and ound to Const Menu with
using up-down button. When pressed to prg button (While being cons menu), the right-hand digit of
bottom row flashes. Set to wanted value with up-down button. Digit moves to the left while pressed to prg
button. Then pressed to prg button again, this digit flashes. Digit position is set with up-down button. You
press again prg button, the digit is continuously flashing. Therefore the constant value is entered in. If you
want to exit without saving, you can back to operating mode with rst button.
.
Resolution of the value shown on the display is set here. This change is done by changing position of the
point on the screen. In order to changed position of the point, pressed to prg button at operating mode
and found point menu with up-down button. The point is flashing when pressed to prg button; you can set
position of the point with up-down button. Then you can save them with prg button. Return to operating
mode with rst button.
4.5. Relay Output Positions (out)

.

 . 




PRG
PRG




4.6. Entering Constant Value (const)

.


.



.

PRG
4.7. Selection Of Point Position (Point)

.


.



.

PRG
- 7 -