About this manual
3
© 2018, ATEÏS, member of PAX ProAV Group
1
About this manual
This user manual will explicitly describe the hardware installation and the software configuration,
provides installers and users the necessary information to setup and configure the system.
1.1
Notice signs
** The above warning is located on the back of the unit.
Explanation of Graphical Symbols
The equipment or the property can be damaged,
or persons can be lightly injured if the alert is
not observed.
To alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
1.2
Safety instructions
Do not expose the device to extreme temperatures, direct sunlight, humidity, or dust, which could
cause fire or electrical shock hazard.
Keep away water or other liquids from the device. Otherwise fire or electrical shock may result.
Connect the power cord only to an AC outlet of the type stated in this manual or as marked on the
unit. Otherwise fire and electrical shock hazard results.
When disconnecting the power cord from an AC outlet always grab the plug. Never pull the cord. A
damaged power cord is a potential risk of fire and electrical shock hazard.
Avoid touching power plugs with wet hands. Doing so is a potential electrical shock hazard.
Take care for correct polarity when operating the device from a DC power source. Reversed polarity
may cause damage to the unit or the batteries.
Avoid placing heavy objects on power cords. A damaged power cord is a fire and electrical shock
hazard.
Do not cut, scratch, bend, twist, pull, or heat the power cord. A damaged power cord is a fire and
electrical shock hazard. Ask your ATEÏS dealer for replacement.
Turn off the unit immediately, remove the power cord from the AC outlet and contact your ATEÏS
dealer in any of the following circumstances, If you continue using the device, fire and electrical
shock may result.
o
Smoke, odor, or noise getting out of the unit.
o
Foreign objects or liquids get inside the device.
