atecpool.com
outer ring. Refer to the below picture.
Installation
There is no maintenance required for this lamp – it is designed to be used only once, meaning
that replacement is necessary if it becomes defective (repairing is impossible). Before any
handling, ensure that there is NO voltage supplied to the lamp. To replace, unfasten the lamp
from the bracket. Ensure the new lamp is of the same model and characteristics as the one
being replaced.
Owner’s Manual > Underwater Super Bright Ultra Slim Panel LED Lighting
1200mm(minimum)
Min. From bottom of
Junction box or low voltage
Transformer to water line
To GFCL circuit breaker and
power source
Rigid conduit
Pool wall
Decorative surface
Screw at top
Min.from water line
to top of lens
INSTALLATION DIAGRAM
