Atec A570TS, Руководство по установке

Страница: 4 / 12

4
Step 1: Attach the left and right brackets to your TV
Do not force the bolts into the mounting holes on your TV. Do not use an electric drill to tight-
en these bolts on your TV. This could damage the equipment or cause personal injury.
CAUTION: Do not place the TV face down on a hard surface when installing the mounting plate
on the TV. Placing the TV face down on a hard surface can result in equipment damage. Use a
blanket or other suitable surface .
Check your TV manual to confirm the required bolt diameter according to the size, depth, and position
of the mounting holes in your TV.
For correct installation, install the brackets with the hook on each bracket facing down.
Install the bolts, spacers, and square washers in accordance with the following:
If your television has a straight back, spacers are not required. Use the selected bolts (A-H) and
square washers (I) to install the bracket directly on the back of the television as shown in Fig 1a.
Make sure that the two brackets are equal in height and are level. Once the brackets are aligned,
securely tighten the bolts.
keep the bracket snug to the rear of the TV without over tightening.
If necessary, use additional washers (N, O) to make sure the bolts (A-H)
A-H
I
Fig. 1a