8
Chapter 2 Assembly
2.1 The requirement of installing ground
Equal ground is very necessary to the machine, the ground must be have good ventilation
system, and can’t be exposed in dust, dirt, wet and active steam, the minimum distance between
back board and it’s nearest bar also
≥
46cm.
2.2 Check, discharged and placed
After
⑴
receiving the equipment, you should check if the equipment has been damaged
during traffic. If damaged, you should notify the conveyance, if lack spare parts, please notify the
dealer at once.
⑵
Take the spare parts out from packing box, remove the packing material, and check if any
cast in packing box.
⑶
Check every airway in the shell, and make sure packing box can’t block air circulating.
⑷
Choose roomy ground to placed spare parts, in order to installing conveniently.
2.3 Installing
Connect frame of welding machine as diagram 2-1.
Diagram 2-1
2.3.1 Installing the kickstand
Block the plastic kickstand into slot that on the front of chassis of machine, and use tapping
screws to firm.
2.3.2 Installing the wheel
Installing as diagram 2-2.
