AWM-BT Page 2 of 3
2. Slide bracket onto post and set height
2.2
Line up the inner guide on
rear of bracket with rear channel
on post. Slide inner guide into
channel and lower bracket.
2.1
Direction of tilt bracket on
post:
When desk fixing is C Clamp
(AWM-FC) or Heavy Duty F
Clamp (AWM-FH) Tilt Bracket
must
only
be attached with
display facing the front of the
mounting surface.
When using Grommet Clamp
(AC-GC) Tilt Bracket can be
positioned with display facing
forwards or backwards on the
post.
2.3
Firmly tighten
hand knob at
chosen height.
1.1
VESA compatibility
1.2
Attach VESA plate with
M4x10 Screws.
1.2
For recessed VESA use
10mm Spacers and M4x20
Screws.
1. Attach VESA plate to display
75mm
100mm
75mm
100mm
For 75mm VESA
unscrew 5mm to
access top holes.
NOTE:
Some displays require the use of a VESA adapter
before attaching the VESA plate. This VESA
adapter may ship in the box with the display.
Consult your display’s installation guide for
further information.
OR
A
C
TOP
A
D
E
TIGHTEN
B
AWM POST
(not supplied)
Arrow side
towards user
B
AWM POST
(not supplied)
Arrow side
towards user
WORK SURFACE
WORK SURFACE
OR
OR
WORK SURFACE
WORK SURFACE
OR
OR
