AWM-A71 Page 4 of 4
7.
Monitor arm cable management
Note:
The cable cover shown,
does not come with all posts
8.4
To reposition the cable cover, pull it
straight up and out of the post and insert
it into any of the available channels
Cable cover
Cable
Cover
Desk
Clamp
8.1
Push the cable down into the cable clip
Note:
Cable clips do not
come with all posts
8.6
Feed remaining cable into cover
8.5
Loop cable and insert into cable cover
8.2
Push cable clip into post channel
8.
Post cable management
atdec.com | atdec.co.uk | atdec.com.au
No portion of this document or any artwork contained herein should be reproduced in any way without
the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer
reserves the right to alter specifications without notice. ©20171206B
8.3
Recommended post cable cover
position for double or triple arm set-ups
7.1
Plug cables into the
monitor and route the
cables down the arm
using the cable hooks
and clips.
1
1
2
Important:
Ensure enough cable slack is given
to allow for movement of the monitor
Alternative cable
cover positions
