AWM-A71 Page 3 of 4
4.
Attach VESA head to monitor
100mm
75mm
100mm 75mm
Flush
Spacer
4.2
Ensure the monitor is attached correctly
4.3
VESA mounting compatibility
100mm
75mm
100mm 75mm
Flush
Spacer
Note:
For other sizes, use a suitable
adaptor plate
5.
Mount monitor
6.
Adjust tilt tension & Install security screw
Gap
No gap
Monitor arm
5.2
Ensure that the VESA head sits flush within
the monitor arm. There should be
no
gap.
6.1
To make for easy tilt adjustment and to prevent the
monitor from falling forward, adjust the tension as show below
Note:
Support
monitor while
adjusting.
6.2 OPTIONAL security screw
To install the optional security screw tilt the head upwards
Tighten
Loosen
Tighten
Loosen
5.1
Insert VESA head into the monitor arm
5.3
Push the lever down to
secure monitor to the arm
assembly
4.1
Screw the VESA head onto monitor
Note:
Spacers may be required for
curved, recessed or uneven monitor
surfaces.
