AD-WM-5060 Page 1 of 4
Installation Guide
AD-WM-5060
Full Motion Wall Mount 5060
COMPONENT CHECKLIST
REQUIRED TOOLS
• Phillips head screwdriver
• Socket wrench set
• 5mm hex key
• Power drill
• Suitable drill bit
• Driver bit for selected
wall fasteners
• Stud finder
• Spirit level
WEIGHT RANGE
0 - 50kg
(0 - 110lbs)
NOTE:
! Wall Plate Mounting Fasteners are
NOT
supplied with Wall Mounts. Professional
installer to ensure correct Mounting Fastener type, location & quantity to suit
structure where Wall Mount is installed.
!
ALWAYS
use a washer between the chosen fastener and the wall plate.
! Mounting fasteners to be used as per manufacturers instructions, including minimum
engagement to achieve necessary performance.
IMPORTANT INFORMATION
! Please ensure this product is installed as per these installation instructions.
! The manufacturer accepts no responsibility for incorrect installation.
! Failure to mount this product correctly may cause serious injury/death during or following installation.
! This product is not suitable for outdoor use.
! Do not use this product for mobile applications.
! This product supports a maximum load of 50kg (110lbs).
! Wall Plate only achieves maximum weight rating when appropriately fastened to a wall of adequate structural capacity.
! Professional installer to ensure adequate structural capacity of wall (including appropriate safety factor) to support total
weight of all equipment being mounted.
! Drilling into electrical wires can cause death - use appropriate equipment and caution when drilling holes in walls to avoid
electrical cables, water pipes and gas pipes. Do not drill into structures unless you have established it’s safe to do so.
! Suits displays with mounting hole patterns from 200mm to 600mm wide by 100mm to 400mm high.
4mm
Hex Key
F
Washer
(x4)
C
D
Security
Plate
(x2)
E
M6x15
Security
Screw (x4)
Spanner
B
Wall Plate
A
Display Arm
Assembly
Arm
Joint Cap
M5x14
Screw
(x4)
M6x14
Screw
(x4)
M8x50
Screw
(x4)
M8x30
Screw
(x4)
M6x30
Screw
(x4)
Multi
Washer
(x4)
Long
Spacer
(x8)
Short
Spacer
(x8)
