ATD Tools ATD-WB, Инструкция по установке и эксплуатации

Страница: 4 / 23

3.1 Safety Devices
The machine is equipped with the following safety device: Rota Ɵ on STOP bu Ʃ on.
REMOVING OR TAMPERING WITH SAFETY DEVICES ENTAILS A VIOLATION OF
THE SAFETY DIRECTIVES, VOIDS WARRANTY AND IS DANGEROUS TO THE USER.
IT COULD RESULT IN IN PERSONAL INJURY OR DEATH.
4. TRANSPORT AND HANDLING
The wheel balancer is packed in a carton box on a pallet.
Transport and handling must be carried out BY AUTHORIZED PERSONNEL ONLY, using a pallet truck or forkli
Ō and adop Ɵ ng
appropriate safety measures.
If the machine is not packed, take the following precau
Ɵ ons:
PROTECT SHARP EDGES AT THE ENDS WITH SUITABLE MATERIAL (bubble wrap or
cardboard).
DO NOT USE METAL WIRE ROPES FOR LIFTING.
SLING WITH STRAPS OF AT LEAST 79” (200 cm) IN LENGTH AND WITH A GREATER
CAPACITY THAN 6,600 lbs. (3000 kg)
DO NOT USE FORCE ON THE SHAFT AND/OR FLANGE
The environmental working condi
Ɵ ons must comply with the following requirements:
- Temperature from 32°F to 113°F (0° C to + 45° C)
- Rela Ɵ ve humidity from 20% to 95%
5. UNPACKING
A Ō er removing the packaging, check the integrity of the machine making sure there are no visibly damaged parts.
In case of doubt, DO NOT USE THE MACHINE and consult professionally quali Į ed personnel (dealer or manufacturer). The
packaging materials (plas Ɵ c bags, expanded polystyrene, nails, screws, pieces of wood, etc.) must not be le Ō within reach
of children as they are poten Ɵ ally dangerous. Take the packaging materials to appropriate collec Ɵ on centers.
MAKE SURE YOU HAVE NOT THROWN AWAY THE ACCESSORY BOX WITH THE
PACKAGING.
It is forbidden to tamper with, bypass or remove the safety devices installed, this being a viola Ɵ on of the safety regula Ɵ ons.
ALWAYS UNPLUG THE POWER CORD FROM THE SOCKET BEFORE MOVING THE MACHINE.
4