ATD Tools ATD-7345B, Руководство пользователя

Страница: 4 / 12

4
PREPARATION
Unpacking
:KHQ XQSDFNLQJ FKHFN to PDNH sure that all of the parts are included. 5HIHU to the parts lists and DVVHPEO\ GUDZLQJV
for more details. If DQ\ part is PLVVLQJ or GDPDJHG do not attempt to DVVHPEOH install or operate the product. Contact
\RXUSRLQWRISXUFKDVH
Assembly
5HPRYHWKHUHWDLQLQJFOLS3UHVVWKHVRFNHWGRZQDQGWKHQSXVKWKHUHWDLQLQJFOLSRXWIURPWKHKROHLQWKH
VRFNHW
QGHUWKHKDQGOHVRFNHW,QVHUWWKHKDQGOHLQWRWKH
KDQGOHVRFNHWXQWLOLWORFNVLQSODFHDQGWLJKWHQWKHKDQGOHVH
EHQRSUREOHPWRRSHUDWHWKHMDFN
WARNING: Do not lift or carry jack by handle. Handle could dislodge and jack could fall, resulting in
possible injury or property damage.
OPERATION
1. Test the MDFN E\ SODFLQJ the saddle under a VWDEOH dead load. Turn the handle FRPSOHWHO\ FORFNZLVH and pump the
handle up and down. The MDFN saddle should rise and sta \ at that level. If it slowl \ JRH s down, t LJK ten the oil SOXJ . If
if still
JRH
s down, the power unit ma
\
need to have the air pur
JHG
from its
V\VW
em.
5H
fer to the Maintenance Section.
!
WARNING: The jack, and equipment being lifted, must be stable so when lifted, they do not fall and cause
points for the vehicle.
T XUQWKHKDQGOHFORFNZLVH The saddle should lower completel \ .
3RVLWLRQWKHMDFNXQGHUWKHHTXLSPHQWEHLQJOLIWHG
4. T XUQWKHKDQGOHFORFNZLVHWRWKHUHOHDVHYDOYH
5. 3XPS the handle up and down until the saddle MXVW touches the item EHLQJ lifted. 5HDGMXVW the saddle position so
WKDWWKHHTXLSPHQWLVFHQWHUHGRQWKHVDGGOH
&RQWLQXHSXPSLQJXQWLOWKHMDFNLVIXOO\H[WHQGHGRUWKHHTXLSPHQWLVOLIWHGWRWKHGHVLUHGKHLJKW
7.
3ODFH
the vehicle stands, or other support devices under the
HTXLSPHQW EHIRUH DWWHPSWLQJ
to do
DQ\ ZRUN
in or
around it.
CAUTION: AVOID RAPID DESCENT AND TO AVOID SPILLING OF THE LOAD, TURN THE HANDLE SLOWLY.
6ORZO\DQGFDUHIXOO\ORZHUWKHORDGE\WXUQLQJWKHKDQGOHFRXQWHUFORFNZLVHLQH[WUHPHO\VPDOOLQFUHPHQWV
VWRUHWKHMDFNLQDGU\ORFDWLRQ
!
MDFN
h