ATD Tools ATD-5226, Инструкция по эксплуатации

Страница: 2 / 16

2
SAFETY INFORMATION
• Follow workshop health & safety rules,
regulations and conditions when using the
trolley mounted oil pump kit.
• During their period of use, accessories must
be checked for wear, cracks and other
damage, replace any damaged or worn
parts.
• Use genuine parts only. Unauthorized parts
may be dangerous and will void the warranty.
• Wear approved safety gloves and eye and
ear protection.
• Keep the trolley mounted oil pump kit clean
and in good working order for best and safest
performance.
WARNING!
• DO NOT use the trolley mounted oil pump kit
for a task it is not designed to perform.
• DO NOT drop, throw or abuse the oil control
gun.
• DO NOT use the trolley kit if damaged or
thought to be faulty. Contact your local
service agent.
PACKAGE CONTENT
DESCRIPTION QUANTITY
3:1 Oil Ratio Pump with 2" Bung, nipple 1
Oil Hose Reel 1
1.5m Connecting hose and swivel 1
Digital Oil control gun 1
Trolley base plate 1
Carrier assembly 1
Handle assembly 1
Miniature Air Filter-Regulator combination
with guage
1
Hardware set 4
O.I.P.M. 1
TOOLS NEEDED
• 10 mm Spanner
• 11 mm spanner / 7/16” spanner
• 12 mm Spanner
• 14 mm spanner / 9/16” spanner
• 17 mm spanner / 11/16” spanner
• 19 mm spanner / 3/4" spanner
• 24 mm spanner / 15/16" spanner
• 25 mm spanner / 1" spanner
• Phillip Screw Driver (PH 2)
BEFORE INSTALLATION
• Use only original accessories compliant with
this trolley mounted oil pump kit.
• Make sure that all connections are secure.
•
Pump construction:
The pump is made up of
two sections
• Drive section: It consists of an air motor
assembly driven by compressed air. The
piston diameter of the air motor is 2.5” (63 mm).
The motor consists of an air cylinder with
piston and one reciprocal valve with a nylon
slider. The valve directs the compressed air
alternately to the top or bottom of the piston,
thus producing a reciprocating motion of the
piston rod.
•
Pumping Section:
It consists of a pump in
which a piston lifts media through non return
valves by reciprocating inside the suction
tube. Media is discharged with pressure (from
the outlet located at bottom of Air Motor) into
the delivery hose / pipe.
• Air motor of this pump starts automatically
when the dispensing gun / tap is opened.
When the dispensing gun / tap is closed, air
motor builds up a back-pressure and stops
operating the pumping section.
• Pressure ratio of the pump states the ratio
of the output fluid pressure to the incoming
air pressure. When the pressure ratio is 3:1, we
achieve an output media pressure up to 450
PSI (30 BAR) when the incoming air pressure is
150 PSI (10 BAR).
• Digital meter
LCD display: Includes three numerical Totals
and other keys as given below:
1. Resettable Batch Total (5 figures with moving
comma): indicates volume dispensed after
RESET button was last pressed.
2. Indication of battery charge.
3. Indication of calibration mode.
4. Batch Totalizer (6 figures with moving comma
in multiple of 10 or 100): indicates two types
of Total:
• Non-Resettable General Total (TOTAL)
• Resettable total (Reset TOTAL)
5. Indication of total multiplication factor
(x10 or x100 ).
6. Indication of type of total, (TOTAL / Reset
TOTAL).
7. Indication of unit of measurement of Totalizer:
• L=Litres
• Gal=Gallons
8. Indication of unit of measurement of
Resettable Batch Total:
• Qts=Quarts
• Pts=Pints
• L=Litres
• Gal=Gallons
1
2
3
4
5
6
7
8