SECN User Guide
Set the
ath0
IP Address
This step sets a unique IP address for the
ath0
mesh interface. Changing this address is optional –
the device will perform in the mesh just as well without any change.
One reason you might want to change this address is to allow connection to the device for
maintenance purposes at a unique address with a PC able to operate in
ah-demo
WiFi mode.
Conversely, leaving all the
ath0
addresses the same provides a known fallback address that will
work on any device.
The default setting for this IP address when the device is flashed is 10.10.1.20 and you may choose
to change just the last octet of the address in order to make the address unique on the mesh, or you
may choose to change the whole address range.
If you are changing the last octet of the address, it is a useful convention to make it the same as the
bridge address.
When you have made any required change, click
Save
at the lower right of the page.
When all required network changes have been made, click
Save&Apply
to commit the changes and
restart the device.
SECN_UserGuideV1d6b
14
