IPPBX IP01 User Manual
~ 26 ~
ATCOM TECHNOLOGY CO., LIMITED
4.4
Make inbound calls
Go to
PBX Settings
->
Inbound Routes
, click
to add an inbound route.
1)General
Caller ID
Define the Caller ID number to be matched on incoming calls. Leave this field blank to match any or no CID info.
Special characters described in chapter 4.3 can be used here as same.
DID number
Define the expected DID number if your trunk passes DID on incoming calls. Leave this blank to match calls with
any no DID info. The DID for SIP trunk is usually as same as the account (others can only dial the account
number to dial into PBX), then just leave it blank is OK .
Extension