IPPBX IP01 User Manual
~ 18 ~
ATCOM TECHNOLOGY CO., LIMITED
Users can configure their follow me settings via their phones.
Reset to Defaults
Reset follow me settings by dialing *70 (default code, can be changed).
After dialing in, PBX will prompt a “beep”,
then the setting is completed and the call will be hung up.
NOTE
: Default Follow Me settings are as below:
Always: Disabled
When no answer: Enabled
When busy: Enabled
Forward to: Voice Mail
Enable/Cancel Unconditional Call Forward
Enable/Disable call forward Always function.
Enable/Cancel Call Forward On Busy
Enable/Disable call forward When Busy function.
Enable/Cancel Call Forward On No-Answer
Enable/Disable call forward When No Answer function.
Call Forward to Number
Set the destination for call forward to number by dialing *74 (default code, can be changed), if the number is not
set yet, dial *74+number to set it.
Call Forward to Voice Mail