www.atcom.cn
8
C
C
C
Chapter
hapter
hapter
hapter 4
4
4
4 Software
Software
Software
Software Configuration
Configuration
Configuration
Configuration
1.
Please check if the AXE-800P driver has been loaded successfully, run cat /proc/interrupts
command and you should see one line with "ax1600p".
If you can not see "ax1600p", you can try to poweroff your server and replug AX-1600P into
another PCI slot.
2.
Please use the “dahdi_genconf” command to configure the /etc/dahdi/system.conf file and
generate /etc/asterisk/dahdi-channels.conf file.
[root@localhost ~]# dahdi_genconf
It does not show any output if dahdi_genconf run successfully.
system.conf
----------------------------------------------------------------------------------------------------------------
# Span 1: WCTDM/16 "Wildcard TDM400P REV E/F Board 17" (MASTER)
fxsks=1
echocanceller=mg2,1
fxsks=2
echocanceller=mg2,2
...
...
...
... ...
...
...
...
...
...
...
... ...
...
...
...
fxsks=7
echocanceller=mg2,7
fxsks=8
echocanceller=mg2,8
# Global data
loadzone
= us (According to your country)
defaultzone
= us (According to your country)
----------------------------------------------------------------------------------------------------------------
