AT820 Series User Manual
35
ATCOM TECHNOLOGY CO., LIMITED
www.atcom.cn
5.5.1.5 Control Timer Values (Seconds)
A.
Interdigit Long Timer: If the numbers or characters input are not finished and they
have not matched the full dial plan, the phone will wait for the long time that have
been set and then dial them out automatically. Range from 1 to 99, the default value
is 20.
B.
Interdigit Short Timer: If the numbers or characters input have matched the full dial
plan, the phone will wait for the short time that have been set and then dial them out
automatically. Range from 1 to 99, the default value is 8.
C.
Reorder Delay: The phone will wait for the reorder delay after far end hangs up to
play the reorder tone. 0 means playing it immediately. Range from 0 to 99, the
default value is 5.
5.5.1.6 Data And Time
A.
NTP
1.
NTP Server: Network time protocol service server, default is pool.ntp.org.
2.
Time Zone: Choose the time zone.
3.
Daylight Saving Time: Whether to enable Daylight saving time or not.
4.
Daylight Saving Time Rule: This parameter is a rule with three fields, each field is
separated by semicolon; as show below:
Start=<start-time>; end=<end-time>; save=<save-time>
<start-time> and <end-time> specify the start and end date of daylight saving
time, month/date/week and <save-time> is the amount of hour/min/sec to add
to the current time during daylight saving period. The <save-time> value can be
preceded by a negative (-) sign if subtraction is desired instead of addition.
If <weekday > is 0, it means the date to start or end daylight saving is at exactly