-2-
ATC Electrical & Mechanical,
ATC House, Broomhill Drive, Tallaght, D24 EF99, Ireland
IE: 01 4678301, UK:0203 564 9164, Email [email protected]
1. This water heater must be earthed.
2. Locate & install this water heater only in accordance with the provided installation
instructions.
3. Use this water heater only for its intended use as described in this manual.
4. This water heater should be installed by a qualified installer.
5. Do not operate this water heater if it is not working properly or if it has been damaged
or dropped.
6. This water heater should be serviced only by qualified service personnel.
7. Failure to examine and if necessary, replace the anode rod at least once a year could
cause the tank to fail and leak and void the warranty.
8. Cable connection should be to a 13A double-pole Switched Spur.
9. This water heater is not suitable for hard water areas unless a suitable water
softener is fitted. In areas of hard water, failure to fit a water softener will cause
premature unit failure and is not covered under warranty.
IMPORTANT SAFETY INSTRUCTIONS-READ BEFOR USING THIS WATER HEATER
THESE INSTRUCTIONS SHOULD BE KEPT FOR FUTURE REFERENCE
1
Cold water Inlet
5
Heating indicator (5ltr)
LED On/Off Switch (10 & 15Ltr)
9
Thermal insulation
2
Hot water Outlet
6
Outer cover
10
Sacrificial Anode
3
Temperature adjustment
7
Electrical heating element
11
Cold water inlet
4
Cover Screw
8
High Level Thermal cutout