4
WEP: When
“
auth=OPEN
”
or
“
SHARED
”
,
effective
TKIP: When
”
auth= WPAPSK
”
, effective
AES: When
“
auth= WPAPSK
”
, effective
◆
key: password, ASCII code, shall less than 64 bit
an greater than 8bit.
This Instruction only effective for ATC-1000WF works
as STA. After ATC-1000WF module boots up again,
the setting will be effective.
AT+WSKEY=WPAPSK,AES,12345678<CR>
+ok
Type below command to see ATC-1000WF wireless
parameter of encryption.
AT+WSKEY<CR>
+ok=WPAPSK,AES,12345678
Step 3
,Set the SSID parameters of the wireless
network.
AT+WSSSID
◼
Function: Set/Query WIFI target AP SSID
parameters as STA.
◼
Format:
◆
Query Operation AT+WSSSID<CR> +ok=<ap’s
ssid><CR>< LF ><CR>< LF >
◆
Set Operation AT+ WSSSID=<ap’s ssid ><CR>
+ok<CR>< LF ><CR>< LF >
◼
Parameters:
◆
ap’s ssid: AP’s SSID
AT+WSSSID=H3C
+ok
AT+WSSSID
+ok=H3C
Step 4,
Query the current module IP address
AT+ WANN
◼
Function: Set/Query WAN setting, only effective as
STA mode;
◼
Format:
◆
Query Operation AT+WANN<CR>
+ok=<mode,address,mask,gateway><CR><
LF ><CR>< LF >
◆
Set Operation AT+ WANN=<
mode,address,mask,gateway ><CR> +ok<CR><
LF ><CR>< LF >
◼
Parameters:
◆
mode: IP setting for WAN port
static: Static IP
DHCP: Dynamic IP
◆
address: WAN port IP address;
◆
mask: WAN port subnet mask;
◆
gateway: WAN port gateway address;
AT+WANN=STATIC,192.168.1.125,255.255.255.0,19
2.168.1.1
+ok
So after setting as above step1-step4.The
ATC-1000WF will automatic to access existing Wi-Fi
wireless network(SSID:H3C).More other detail AT+
Command see ATC-1000WF User’s Manual
(Ver2.1 )as well.Please see below total AT+Command
setting list again.
AT+WMODE=STA <CR>
AT+WSKEY=WPAPSK,AES,12345678<CR>
AT+WSSSID=H3C
AT+WANN=STATIC,192.168.1.125,255.255.255.0,19
2.168.1.1
9
9
.
General Specification
Class
Item
Parameters
Wireless
Parameters
Certification
FCC/CE
Wireless standard
802.11 b/g/n
Frequency range
2.412GHz-2.484GHz
Transmit Power
802.11b: +20 dBm (Max.)
802.11g: +18 dBm (Max.)
802.11n: +15 dBm (Max.)
Receiver Sensitivity
802.11b: -89 dBm
802.11g: -81dBm
802.11n: -71dBm
Antenna
External Antenna
Software
Parameters
Network Type
STA /AP/AP+STA mode
Security
Mechanisms
WEP/WPA-PSK/WPA2-PSK/WAPI
Encryption
WEP64/WEP128/TKIP/AES
Work Mode
Transparent Transmission
Serial command
AT+instruction set
Network Protocol
TCP/UDP/ARP/ICMP/DHCP/DNS
/HTTP
Max. TCP
Connection
32
User Configuration Web Server
＋
AT command config.
Hardware
Parameters
Data Interface
Data Rate: 1200bps - 230400bps
RS-232,RS-422,RS-485
Operating Voltage
9-24VDC
Operating Current
Avg:200mA, Peak:400mA
Operating
Temperature
-40
℃
- 70
℃
Storage
Temperature
-45
℃
- 125
℃
Dimensions
100 x 86 x 26 mm
