11
f) Press (OK) button,
should be displayed on the LCD screen
g) Use the (+PRG) or (-MAN) buttons to scroll through menu options so that the
display looks like it does in step F EXCEPT the On in the upper left corner
should not be illuminated only the Out and the symbol in the upper right
hand corner should be illuminated (this is how this device is put into pulse
mode)
h) Press the (OK) button
i) The two hours digits on the left side of the display should be blinking, adjust
the numbers using the (+PRG) or (-MAN) buttons to set the desired hour that
you want the output to come on and than press the (OK) button
j) Now the two minutes digits are blinking on the right side of the display, adjust
the numbers using the (+PRG) or (-MAN) buttons to the desired minute time
that you want the output to come on and than press the (OK) button
k) Now it is time to select which days of the week this program will be on for by
pressing the (OK) button on either on or off along with the corresponding
number in the top of the display that represents the days of the week,
example:
l) Choose
ON
or
OFF
by using (+PRG) or (-MAN) to scroll between the two
chooses and (OK) to enter the choose (the numbers at the top represent the
days of the week by the number
1 = Monday
and the
7 = Sunday
)
m) Once programming is done and the word
ADD
is again displayed and you
are done adding programs than just hit the (MAN 2/ESC) button twice to exit
back to original run mode, (the indicator bar that goes with the corresponding
output should be illuminated at the button only on times where the output it to
be on for that day)
5.) Random Switching Mode
This mode is displayed on the LCD screen by an illuminated the
symbol
witch causes a random switching of the output in the time
range from 10 to 120 minutes. (Example use: This mode is for irregular
switching of appliances like a light, which simulates presence of people in
the house.
a) Press and hold the (+PRG) button for 3 seconds,
is what
shows on the LCD display ( also you will see
prog
in the upper left corner of
the display)
b) Press the (+PRG) twice until the display shows
on the units
LCD screen and the word MAN should also be illuminated
c) Press (OK) button, (
Ch01
or
Ch02
should display)
d) You can choose whether to control output 1 or output 2 by scrolling between
them with the (+PRG) or (-MAN) buttons
