ATC Group P4, Руководство пользователя

Страница: 8 / 9

Drivers:
HF 25mm (1") 25mm (1")
MF 75mm (3") 75mm (3")
LF 2 x 314mm (12") 2 x 375mm (15")
Amplitude Linearity ±2dB 60Hz - 12kHz 50Hz - 12kHz
Cut-off Frequencies
(-6dB free standing)
32Hz & 20kHz 25Hz & 20kHz
Cut-off Frequencies
(-6dB soffit mounted)
25Hz & 20kHz 20Hz & 20kHz
Dispersion:
Horizontal ±80° Coherent ±80° Coherent
Vertical ±10° Coherent ±10° Coherent
Max Continuous SPL 118dB SPL @ 1 metre 121dB SPL @ 1 metre
Cabinet Dimensions (HxWxD) 830 x 730 x 440mm 884 x 925 x 460mm
Overall Weight 116kg (255.2lb) 140kg (308lb)
Cabinet Finishes Standard real wood veneers are available in Black Ash, Mahogany, Cherry and
Natural Oak. Other veneers and finishes can be supplied to special order.
SCM200/300ASL/P4
7
Specifications comply with the following standards: Australian Standard
Specification No 1127 "Sound System Loudspeakers" Part 5, IEFE Specification
Standard No 219-1975
ATC reserves the right to vary products and specifications without prior notice.
Acoustic Transducer Co. is a trading name and ATC is the registered trade mark
of Loudspeaker Technology Ltd.
SCM200ASL SCM300ASL
P4
S p e c i f i c a t i o n s
Amplifier Output:
LF1 275 Watts RMS into 8 Ohms
LF2 275 Watts RMS into 8 Ohms
MF 200 Watts RMS into 16 Ohms
HF 100 Watts RMS into 6 Ohms
Input Connector Male XLR
Input Sensitivity 1.0V Balanced
Input Impedance >10k Ohms
Amplitude response 5Hz - 20kHz ±0.1dB
Signal/Noise Ratio Better than 105dB
Crosstalk Better than 90dB
Crossover Frequency 380Hz and 3.5kHz
Filters Even order critically damped
Overload Protection Active FET Momentary Gain Reduction on all amplifiers
Power Requirements:
Voltage 100, 115, 230V (factory set)
Frequency 50/60Hz
Power Consumption 150VA (standby minimum) 1200VA (maximum)
Dimensions 19 inch rack mountable (5U high)
Overall depth 545mm
Front panel & handles 75mm
Rear handles 40mm
Amplifier body 430mm
Overall Weight 40kg (88.2lb)