atBox Technology InternetVue DT11-KIT, Руководство пользователя

Страница: 15 / 18

2. Run ‐ time OSD
When the DT11 ‐ RX is streaming video from a source transmitter, the OSD options are different than in #1
above. Again, pressing the SOURCE button brings up the OSD:

In the Run ‐ Time OSD, the list of available transmitters is listed first. In the example here, two
transmitters are shown, “DVD ‐ 1” and “APPLE ‐ 3”. The numbers in the parentheses are its MAC
addresses. The “connected” status indicates that this DT11 ‐ RX unit is currently showing the AV
stream from the transmitter “DVD ‐ 1”.
To select another transmitter’s content to display, simply press the SOURCE button again until it is
highlighted, wait three seconds, and its stream will be shown instead.

VGA SYNC (appears only if input at transmitter is VGA) re ‐ synchronizes VGA signal

REFRESH will search the network again for any enabled DT11 ‐ TX (PCA) units

PCA SETTING brings up the options for the currently selected transmitter. Select this option to go to
the next menu below

TVA OFF disables the DT11 ‐ RX from displaying any video or audio

EXIT turns off the OSD

MULTI/ONE TVA brings up the MULTI/ONE menu below

BANDWIDTH SETTING brings up the BANDWIDTH menu below

INFORMATION displays the current operating modes of both the receiver and currently
selected transmitter

EXIT turns off the OSD

ONE TVA ONLY sets the currently selected transmitter to Unicast mode wherein
only this receiver can display that transmitter’s content

MULTI TVA sets the currently selected transmitter to Multicast mode wherein more
than one receiver can display that transmitter’s content

EXIT turns off the OSD
> DVD ‐ 1 (00:00:20) connected
> APPLE ‐ 3 (00:00:26)
> REFRESH
> VGA SYNC
> PCA SETTING
> TVA OFF
> EXIT
> MULTI/ONE TVA
> BANDWIDTH SETTING
> INFORMATION
> EXIT
> ONE TVA ONLY
> MULTI TVA
> EXIT