ATB AQUAmax BASIC, Руководство по установке, Страница: 3 / 24

Installation instructions AQUAmax
®
BASIC/CLASSIC 1-75
ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com /
Art.-No.: 9060 0209 / Status: 17.01.2019 / Page 3 from 24
Contents
Page 4:
General and safety information
Page 6: Scope of delivery
Page 9: Services to be provided by the customer
Page 10: Tank preparation / installation example
Page 12: Assembly drawing AQUA
max
®
CLASSIC Z, Switch-off point float switch
Page 13: Preparation of the AQUA
max
®
Page 14: Installing of the AQUA
max
®
Page 16: AQUAmax® with compressed aeration (ZB)
Page 18: Sampling bottle / Sampling bypass
Page 19: The ATB
control
©
3 control equipment
Page 21: Cable conn test run
Page 22: Pre-commissioning check
Dear customer,
at this point we would like to thank you for the trust which you have shown with the purchase of this
product.
On the following pages you will find everything necessary about the installation, operation and the
maintenance requirements of your AQUA
max
®
small wastewater treatment plant.
Please observe that the careful installation of the wastewater treatment plant is very important for a
good treatment performance.