Asteroids
D. TV Monitor
Replacement
--- A
WARNING ------------
High voltages may exist in any television unit,
even with power disconnected. Use extreme
caution and do not touch electrical parts or the
TV yoke area with your hands or with metal ob
jects in your hands!
If you drop the TV monitor and it breaks,
it will
implode!
Shattered glass and the yoke can fly
6 feet or more from the implosion. Use care
when replacing any TV monitor.
If you should need to remove the Quadrascan X-Y TV
monitor, follow steps 1 thru 6 on this page. Refer
also to Figure 9 below.
1. Open the control panel as described in Section
C, Opening the Control Panel.
Be sure the game
is unplugged from its wall outlet!
2.
Remove the acrylic TV monitor shield by sliding
its lower edge out.
3. Working up from the bottom side corners,
carefully pry loose the two side flaps of the
colorful 2-piece cardboard bezel. (A 4-inch strip
of double-sided adhesive tape is centered
behind both side flaps, flush with each edge.)
Remove the bezel as a complete unit— do not
remove the smaller part first.
4. Open the rear access panel and unplug the TV
monitor harness connectors— both are on the
TV’s printed circuit boards.
5.
Remove the four sets of carriage bolts, flat and
split lock washers, and hex nuts that hold down
the metal TV chassis.
6. Carefully slide the TV monitor chassis out the
front of the game.
Disassemble
in the order
indicated
Figure 9 TV Monitor Removal
14
Содержание ASTEROIDS
