background image

4. Rights of the telephone company 

If this equipment is causing harm to the telephone network, the telephone 
company may temporarily discontinue your telephone service. The telephone 
company is required to notify you before interrupting service. If advance 
notice is not practical, you will be notified as soon as possible. You will be 
given the opportunity to correct the problem and the telephone company is 
required to inform you of your right to file a complaint with the FCC. Your 
telephone company may make changes in its facilities, equipment, operation, 
or procedures that could affect the proper functioning of this product. The 
telephone company is required to notify you if such changes are planned.

5. Hearing aid compatibility 

If this product is equipped with a corded or cordless handset, it is hearing aid 
compatible.

6. Programming/testing of emergency numbers 

If this product has memory dialing locations, you may choose to store police, 
fire department and emergency medical service telephone numbers in these 
locations. If you do, please keep three things in mind:

a.

 We recommend that you also write the telephone number on the directory 

card (if applicable), so that you can still dial the emergency number manually 
if the memory dialing feature doesn’t work.

b.

 This feature is provided only as a convenience, and the manufacturer as-

sumes no responsibility for customer reliance upon the memory feature.

c.

 Testing the emergency telephone numbers you have stored is not recom-

mended. However, if you do make a call to an emergency number:

  You must remain on the line and briefly explain the reason for the call 

before hanging up.

  Programming/testing of emergency numbers should be performed during 

off-peak hours, such as in the early morning or late evening, when the 
emergency services tend to be less busy.

Interference Information: 
Part 15 of FCC Rules

Some telephone equipment generates, uses, and can radiate radio-frequency 
energy and, if not installed and used properly, may cause interference to radio 
and television reception.
This product has been tested and found to meet the standards for a Class B 
digital device, as specified in Part 15 of the FCC Rules. These specifications 
are designed to provide reasonable protection against such interference in a 
residential installation. However, there is no guarantee that interference will not 
occur in a particular installation. 
If this product causes interference to radio, VCR or television reception when 
it is in use, you might correct the interference with any one or all of these 

Содержание TRIMLINE 265





































Отзывы: