Battery installation & charging
Install the battery as shown below. After installing the battery, you can make
and receive short calls. Place the handset in the telephone base or charger
when not in use. For optimal performance, charge the handset battery for at
least 16 hours before use. See the table on page 84 of the user's manual for
battery operating times.
Step
1
Plug the battery securely
into the connector inside
the handset battery
compartment, matching
the color-coded label.
Insert the supplied battery
with the label
THIS SIDE
UP
facing up as indicated.
Step
2
Step
Press the depression
and slide the battery
compartment cover
downwards (if
necessary).
Align the cover flat
against the battery
compartment
cover, then slide
it upwards until it
clicks into place.
Charge the handset by placing it face up in the
telephone base or charger. The
CHARGE
light will
be on when charging.
Step
4
IMPORTANT INFORMATION
Use only the supplied rechargeable battery or replacement battery (model BT8001). To
order, visit our website at
www.telephones.att.com
or call
1 (800) 222-
3111.
In Canada, dial
1 (866) 288-4268.
5
