Adding and registering handsets
Before using a new TL88002/TL88002BK handset, you must
register it with the AT&T TL88102/TL88102BK/TL88202
TL88102/TL88102BK/TL88202
telephone system (purchased separately). The telephone system
accommodates up to 12 handsets.
TL88002 (silver) is for use with TL88102 telephone system.
TL88002BK (black) is for use with TL88102BK telephone system.
The handset provided with your telephone system is already
registered as
HANDSET
. Additional handsets registered to the
telephone system are assigned in sequential order they are
registered (up
to
HANDSET 12
).
You must register each handset separately. When first purchased,
each expansion handset shows
Press [HOLD] on base for 4 sec,
then press [#] on handset
.
Register a handset to your TL88102/TL88102BK/TL88202
L88102/TL88102BK/TL88202
telephone base
1. Before you begin registration, make sure the
handset displays
Press [HOLD] on base for 4
sec, then press [#] on handset
.
2. Place the unregistered handset in the
telephone base.
3. Press and hold
HOLD
on the telephone base
for about four seconds until the telephone base
displays
Registering handset...
. Then, release
the
HOLD
button. While the handset is still in
the telephone base, press
#
(pound key) on
the handset. The handset shows
Registering...
Please wait
and it takes up to 60 seconds to
complete the registration. The handset and the
telephone base show
HANDSET X Registered
(
X
represents the handset number assigned)
and you hear a beep when the registration completes.
NOTES:
If the registration fails, the handset shows
Registration failed
. To reset the handset,
unplug the power from the telephone base and the battery from the handset for a
few seconds, then plug them back in. Try the registration process again.
You cannot register a handset if any other system handset is in use.
•
•
Registration and deregistration
8
HANDSET X
Registered
Registering...
Please wait
Press [HOLD] on
base for 4 sec,
then press [#]
on handset
