AT&T TL7612 Скачать руководство пользователя страница 66

Appendix

59

Important safety information

Potential TV interference: 

Some cordless headsets operate 

at frequencies that may cause interference to TVs and VCRs. 
To minimize or prevent such interference, do not place the 
headset base of the cordless headset near or on top of a TV 
or VCR. If interference is experienced, moving the cordless 
headset farther away from the TV or VCR will often reduce or 
eliminate the interference. 

Rechargeable batteries:

 This product contains nickel-cadmium, 

nickel-metal hydride or lithium-ion rechargeable batteries. 
Exercise care in handling batteries in order not to create a short 
circuit with conductive material such as rings, bracelets and keys. 
The battery or conductor may overheat and cause harm. Observe 
proper polarity between the battery and the battery charger.

Lithium-ion rechargeable batteries:

 Dispose of these 

batteries in a safe manner. Do not burn or puncture. Like 
other batteries of this type, if burned or punctured, they could 
release caustic material which could cause injury.

The RBRC™ Seal means that the manufacturer is voluntarily 

participating in an industry program to collect and recycle  

lithium-ion rechargeable batteries when taken out of service 

within the United States. These batteries may be taken to a 

participating local retailer of replacement batteries or recycling 

center. Or you may call 1-800-8-BATTERY for locations accepting 

spent Li-ion batteries.

CAUTION:

There may be a risk of detonation if you use a wrong type of 
battery. Use only the battery provided or replacement battery 
purchased separately (model BT191545 “BYD SL531732”).
Change this product's batteries only in accordance with the 
instructions and limitations specified in this manual.
As with any batteries, do not allow conductive materials such 
as rings, bracelets or keys to come in contact with the metallic 
parts of the battery. The battery or conductor may overheat 
and cause harm.

Содержание TL7612


















































































Отзывы: