Customization Chart
SAMPLE ADMINISTRATION OVERLAY
Follow this chart to perform all your customizing duties.
A more detailed set of instructions starts on page 10.
■
To get a different line of features, press ENTER ADMIN (at
●
).
■
To customize another feature in the same row, press
FEATURE.
■
To leave customization mode, hang up. Replace overlay in pocket.
Don’t forget to turn the administration switch OFF
AT CONTROLLER
when you are finished customizing your system.
■
Light patterns indicate current setting:
OFF is 1
ON is 2
Even Flash is 3
Wink (short on, long off) is 4
TURN ADMINISTRATION SWITCH ON
AT TELEPHONE SET 10
PRESS INTERCOM
LIFT receiver (or press speaker)
DIAL * 0 (Confirmation tone)
INSTALL Administration Overlay
SYSTEM RESET
SYSTEM SPEEDCALL
(to return to Installed settings)
DIAL 1
DIAL 2
DIAL 3
CUSTOMIZING THE
SYSTEM
CUSTOMIZING EACH
TELEPHONE
DIAL 0
All other telephones
must be Idle
CHANGE A NUMBER:
ERASE A NUMBER:
DIAL 09009
All other telephones
must be idle
PRESS STATlON
●
Dial telephone number
●
Press MEMORY
6-Button Sets DIAL extension number
24-Button Sets PRESS auto-dial button
●
Press MEMORY
●
Enter two-digit code of number
●
Enter two-digit code of number
to be erased
to be changed
●
Listen for confirmation tone
To customize another
●
Listen for confirmation tone
Repeat these steps for each
telephone set, press STATION.
Repeat these steps for each telephone
telephone number to be erased.
number to be changed.
Follow any dotted Iine path.
Choose only those features you wish to change.
AUTOMATIC PRIVACY
TOLL CALL CHECK
HELD CALL REMINDER
LINE TYPE
PBX LINE
EXTERNAL ALERT
DIAL TYPE
PRESS FEATURE
PRESS FEATURE
PRESS FEATURE
Press FEATURE
ACCESS CODES
PRESS FEATURE
PRESS FEATURE
PRESS FEATURE
DIAL 1
DIAL 2
D I A L 3
DIAL 4
DIAL 5
DIAL 6
DIAL 7
1 O f f
To enter a code:
D I A L —
DIAL— 1 “1” Required †
0 No reminder
PRESS line button(s)
PRESS Iine button(s)
PRESS Iine button(s)
2 On †
1 One minute †
DIAL code
1 Touch Tone
2 “1” Not Required
1 Never
DIAL —
— 1 Unavailable Line
PRESS ADD
2 Night Only †
DIAL — 2 Two minutes
To Drop a code:
DIAL code
DIAL— 3 Day Only
2 Dial Pulse †
3 Three minutes
DIAL —2 Outside Line †
PRESS DROP
3 PBX/Centrex line
4 Always
4 Four minutes
To erase all codes:
PRESS DROP
P R E S S *
PRESS DROP
(lnstalled code is 9)
†
lnstalled Setting
LINE USE PERMISSION
PRESS FEATURE
DIAL 1
PRESS line button(s)
1 No Permission
DIAL — 2 Full Permission †
3 Answer Only
A U T O M A T I C
LINE SELECTION
PRESS FEATURE
DIAL 2
PRESS Iine button(s)
DIAL —
1 Not Eligible
2 Eligible †
LINE RlNGING
OPTIONS
PRESS FEATURE
DIAL 3
PRESS line button(s)
1 No Ring
DIAL— 2 Normal †
3 Abbreviated
NIGHT RINGING
PRESS FEATURE
DIAL 4
DIAL— 1 Normal Ring
2 Programmed Ring †
OUTSIDE SERVICE
PRESS FEATURE
DIAL 5
1 0utward Restricted
DIAL —2 Unrestricted †
3 Toll Restricted
COPY TO TELEPHONE
PRESS COPY TO
DIAL extension number
24 Button Sets PRESS
auto dial button
COPY TO All
PRESS COPY TO
PRESS *
All other telephones must
4 Delayed
be idle
Содержание SPIRIT 308
