page 4
page 5
Location of Main Unit Controls
Bottom
Top
1
3
4
5
2
1. Power button
2. USB charging output
3. LED power indicator
4. Micro-USB port
5. Flashlight
Contents
Operational Instructions
Charging Your PTBP2600
• Using the included USB to micro-USB cable, plug the
micro-USB connector into the micro-USB input jack on
your PTBP2600 and the USB connector into any USB
charging port.
• Upon initial use, or after a prolonged storage period, the
PTBP2600 should be fully charged in approximately 3
hours.
• The LED Power Indicator lights will light up to show you the
charging progress.
Note: The unit’s full performance is achieved after 2 or 3
times of complete charge and discharge cycles.
Charging Your Mobile Device
• Depending on your mobile device’s charging port plug
the USB connector of your charging cable into the USB
output port on the PTBP2600, and then the corresponding
connector into your mobile device.
• Your device will automatically begin charging and the LED
Power Indicator on the PTBP2600 will light up.
