AT&T OneVision DEFINITY G3 Guide, Инструкция по установке и подключению, Страница: 75 / 287

Issue 2 April 1996
4-15
UnixWare Administration
To Assign Devices to Ports
To Assign Devices to
Ports
Introduction You need to assign devices (terminals and modems) to the ports
on your system so that the port monitors can recognize them.
When to use Assign devices to ports after you have installed UnixWare.
Procedure Use the following steps to assign a terminal or a modem to a port:
Step Action
1 Enter the following command at the UNIX prompt:
/usr/sbin/sysadm
Result: The OA&M Operations, Administration and
Maintenance menu displays.
2 Open the Quick Terminal Setup screen.
Hint: Select the following options to navigate through the
OA&M screens:
At this screen . . . Select this option . . .
OA&M Operations,
Administration and
Maintenance
ports
Service Access Management
quick-terminal
Quick Terminal Setup
add