AT&T NetGate 8200, Руководство по установке

Страница: 5 / 24

5
Basic connectivity is shown in Figure 2. Devices in the local network
are connected to one or more of the LAN ports on the rear of the
AT&T NetGate 8200; the broadband connection is usually
established via the
WAN 1 port. An optional dial connection is also
possible via the supplied cable.
! WARNING !
No user serviceable parts.
Do not remove cover.
- +
12VDC 1.5A
LAN
1
3 5 7
2 4 6
8
RST
USB 1 USB 2 USB 3 CONSOLE
AT&T NetGate 8200
INTERNET
Optional Analog
Phone Line
Broadband Internet
Device (DSL / Cable
modem)
Other network devices
Computer
Modem
WAN 2 WAN 1
Figure 2: Basic Network Connectivity
Option a. Wired Ethernet Connection
Use a straight-through Ethernet cable (usually provided by your
Broadband Internet Service Provider) to connect your Internet
broadband interface device to the Ethernet port labeled
WAN 1 on
the AT&T NetGate 8200. The AT&T NetGate should be connected
directly to the broadband interface device.
Dynamic Host Control Protocol (DHCP) is the default configuration
for Internet IP addressing of the AT&T NetGate 8200 Internet
network interface. If your device automatically obtains an address
from your ISP through DHCP, it should auto-configure shortly after
powering up.
If your Broadband Internet Service Provider supplied you with a static
IP address or PPPoE account information for use with your