AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 472 / 887

Tie Trunks
4–100
Programming Procedures
Console Display/Instructions Additional Information PC
4 Enter the tie trunk number.
**** Trunk Tyoe:
**** = option name selected in Step 3
Enter trunk for assignmt
Dial or type:
Û
Trunk number [ nnn ]
Backspace
Slot and port number
*
[ sspp ]
Exit Enter
Logical ID number
#
[
nnn
].
5 Save your entry.
Select
Enter
Enter
.
0
6 Specify the tie trunk type.
Trunk xxxx:
xxxx
= trunk entered in Step 4
Select **** Trk type
**** = option name selected in Step 3
_
Wink
_
Delay
Select
Wink Wink
,
1
_
Immmed Delay Delay
,
2
_
Auto Next Immed Immed
, or
3
Exit Enter Auto Auto
.
4
7 Continue to assign a type to another trunk or go to Step 8.
Select
Next Next
.
9
Return to Step 6. The next trunk will be
displayed on Line 1.
8 Save your entry.
Select
Enter Enter
.
0
9 Return to the System Programming Menu.
Select
Exit
Exit
two times.
55
E&M Signal
Use this procedure to specify the type of tie trunk signal, as follows:
■
E&M Mode
1S. Type 1 Standard. Tie trunks that are connected through the local
telephone company.
1C. Type 1 Compatible. Tie trunks that are connected directly to a
system that uses 1S signaling.
■
Simplex Mode:
5. Type 5 Simplex. Tie trunks that are connected to a system using
Type 5 signaling.