AT&T GL2101-2 Скачать руководство пользователя страница 7

Страница: 7 / 82

Getting started

Important safety information

Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery,

that can result in an explosion.

Leaving a battery in an extremely high temperature surrounding environment that can

result in an explosion or the leakage of flammable liquid or gas.

A battery subjected to extremely low air pressure that can result in an explosion or the
leakage of flammable liquid or gas.

Use only the supplied rechargeable battery or replacement battery (model BT162342/BT262342).
To order, visit our website at

https://telephones.att.com

or call

1 (800) 222-3111

. In Canada, dial

1 (866) 288-4268

The applied nameplate is located at the bottom or near of the product.

Especially about cordless telephones

Privacy: The same features that make a cordless telephone convenient create some limitations.

Telephone calls are transmitted between the telephone base and the handset by radio waves, so

there is a possibility that your cordless telephone conversations could be intercepted by radio

receiving equipment within range of the cordless handset. For this reason, you should not think

of cordless telephone conversations as being as private as those on corded telephones.

Electrical power: The telephone base of this cordless telephone must be connected to a

working electrical outlet which is not controlled by a wall switch. Calls cannot be made from

the handset if the telephone base is unplugged, switched off or if the electrical power

is interrupted.

Potential TV interference: Some cordless telephones operate at frequencies that may cause

interference to TVs and VCRs. To minimize or prevent such interference, do not place the

telephone base of the cordless telephone near or on top of a TV or VCR. If interference is

experienced, moving the cordless telephone farther away from the TV or VCR will often reduce

or eliminate the interference.

Rechargeable batteries: This product contains nickel-metal hydride rechargeable batteries.

Exercise care in handling batteries in order not to create a short circuit with conductive material

such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm.

Observe proper polarity between the battery and the battery charger.

Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not

burn or puncture. Like other batteries of this type, if burned or punctured, they could release

caustic material which could cause injury.

The RBRC Seal means that the manufacturer is voluntarily participating in an

industry program to collect and recycle nickel-metal hydride rechargeable

batteries when taken out of service within the United States. These batteries

may be taken to a participating local retailer of replacement batteries or

recycling center. You may call 1-800-8-BATTERY® for locations accepting

spent Ni-MH batteries.

The RBRC Seal and 1-800-8-BATTERY® are registered trademarks of Call2recycle,

Inc.

Содержание GL2101-2



















































































Результаты поиска

Содержание GL2101-2

Отзывы:

Похожие инструкции для GL2101-2

Бренды по названию

Популярные бренды

AT&T GL2101-2, Полное руководство пользователя

Результаты поиска

Содержание GL2101-2

Отзывы:

Похожие инструкции для GL2101-2

Бренды по названию

Популярные бренды