24
Voice guide
This feature is an alternative way for you to do the basic setup of the answering
system. You can follow the voice guide to record your own announcement, set the
number of rings, and set the message alert tone.
This feature is only available on the cordless handset.
Press
MENU/
SELECT
when the handset is idle.
Press
CID
or
DIR
to scroll to
Answering sys
, then press
MENU
/SELECT
.
Press
CID
or
DIR
to scroll to
Voice guide
, then press
MENU
/SELECT
. You hear
a voice prompt, “
Hello! This voice guide will assist you with the basic setup of your
answering system.
“
Set up your answering system by inputting designated numbers, as instructed in
the voice guide.
NOTE:
You can press
OFF
/CANCEL
to quit the voice guide at any time.
Number of rings
You can set the answering system to answer an incoming call after
2
,
3
,
4
,
5
, or
6
rings. You can also select
Toll saver
. If toll saver is selected, the answering system
answers a call after two rings when you have new messages, and after four rings
when there are no new messages. This feature allows you to check for new messages
and avoid paying long distance charges if you are calling from out of your local area.
Unless you change it, the answering system answers an incoming call after three rings.
To set the number of rings:
Press
MENU/
SELECT
on the handset when it is not in use.
Press
CID
or
DIR
to scroll to
Answering sys
, then press
MENU
/SELECT
.
Press
CID
or
DIR
to scroll to
Ans sys setup
, then press
MENU
/SELECT
.
Press
CID
or
DIR
to scroll to
# of rings
, then press
MENU
/SELECT
.
Press
CID
or
DIR
to scroll and choose among
2
,
3
,
4
,
5
,
6
or
Toll saver
.
Press
MENU
/SELECT
to save your setting.
NOTE:
If you have muted the first ring, you will hear one ring less before the answering
system answers the incoming calls.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
# of rings
ECO
3
ECO