9
Getting started
3. To attach the bracket for wall mounting,
insert the tabs of the bracket into slots
and
on the telephone base, then press
the other bracket tabs into slots and
as shown on the right.
4. Plug the power adapter into an electrical
outlet not controlled by a wall switch. Plug
the telephone line cord into a telephone wall
jack. To mount the telephone on the wall,
position the mounting holes and over
the telephone outlet mounting studs. Press
and slide the bracket down firmly so the
telephone is held securely on the telephone
outlet mounting studs.
Telephone outlet mounting studs
Installation options
Tabletop mounting
To change back from the wall mounting to tabletop mounting, follow the
directions below.
1. Remove the telephone base from the wall.
Unplug the cords from the wall jacks. Remove
the bracket from the telephone base.
2. Insert the bracket tabs into slots
and on the telephone base,
then press the other bracket tabs
into the slots and .
3. Route cords through slots. Plug the other
end of the telephone line cord into a tel-
ephone wall jack. Plug the large end of the
larger power adapter into an electrical out-
let not controlled by a wall switch.
