LOW BATTERY
7
Getting Started
Battery installation & charging
After installation, place handsets in the base and charger for at least 8 hours before use.
You can keep batteries charged by returning the handsets to the base or charger after
each use. When battery power is fully depleted, a full recharge takes about 6 hours.
Press coin into slot on
base of handset to
release latch, then
remove battery cover.
Insert supplied
batteries.
Place handset in base to charge
for 8 hours before first use.
Rotate antenna to fully upright
position.
Low battery indicator
Recharge handset batteries when
this symbol flashes. (Handset will
beep when battery is low.)
DID YOU KNOW?
Optional spare batteries can be kept charged in
the base, for quick replacement when handset
batteries become depleted (see page 37).
Insert top
tab first.
To replace battery cover
Press down to
click in place.
REDIAL
MEM
MENU
Caution:
Use only the supplied NiCd
battery (80-5469-00-00) or AT&T model
2AA NiMH replacement battery (SKU
26820).
Do not use alkaline batteries.
91-5635-40-00.E2600B.RO.qxd 02/13/1950 19:21 Page 7
