AT&T CLP99183, Руководство пользователя, Страница: 34 / 60

Telephone operation
34
Make, answer and end a call
Using the telephone base:
To make a cell call:
1. Press CELL 1 or CELL 2 , then enter the telephone number.
2. Press DIAL .
To predial a cell call :
Enter the telephone number, then press
CELL 1
or
CELL 2
.
To answer a cell call :
Press HOME, CELL 1, CELL 2 or any dialing key (0-9 or TONE ) .
To end a cell call :
Press CELL 1 or CELL 2 .
NOTES:
You can also use your cell phone to answer the call. If you answer with your cell phone, it discon-
nects from the telephone base.
If you do not want to answer the call, press
REJECT . The screen displays Call rejected and then
returns to the idle mode.
When you try to make a cell call but your cell phone is not connected to the base, the telephone
base displays
Cellular phone not connected. Please connect to proceed. Press CONNECT
to connect your cell phone to the telephone system. Refer to Bluetooth connection from idle
mode on page 23 and Connect/disconnect an active device on page 24.
Call waiting on the cell line
If you subscribe to call waiting service from your cell phone service provider,
you hear a beep if someone calls while you are already on a call.
Using a cordless handset:
Press CELL 1 or CELL 2 to put your current call on hold and take the
new call.
Press
CELL 1 or CELL 2 at any time to switch back and forth between
calls.
-OR-
Press SWAP to switch. To switch back, press OPTION . Press
CID
or DIR
to highlight Swap , then press SELECT .
Using the telephone base:
Press
SWAP
on the telephone base. The original call is put on hold and
you take the new call.
Press
OPTION on the telephone base. Press CID or DIR to highlight
Swap . Press SELECT to resume the original call. The other incoming cell
call is put on hold.
•
•
•
•
•
•
•
•
•
•