AT&T 984 Скачать руководство пользователя страница 66

Страница: 66 / 145

phone

oper

ation

phone

oper

ation

Call privacy

To ensure call privacy, this phone allows only one set
at a time to use a line.

Cancel call privacy

During the call, press the

LINE

button for the call.

You’ll hear a short beep. Others can now join the call.

Restore call privacy

Press the

LINE

button again during the call. You’ll hear

a double-beep. The other phones will be dropped from
the call.

NOTE:

call privacy is automatically restored when

you end the call.

NOTE:

When a non-system phone answers a call,

any other system phone can pick up the call by pressing
the

LINE

button. Once a system phone picks up the

call, call privacy is activated and no other system phones
can listen to the call unless call privacy is canceled, but
non-system phones which share that line can still join
the call.

Do not disturb

When you activate do not disturb (DND), you will not
hear paging tones, voice paging, or incoming call rings.
Instead, the

LINE

light flashes and the

INTERCOM

light

goes on to signal an incoming call or page. If you receive
an intercom call, the

INTERCOM

light flashes, and the

number of the intercom extension calling you appears on
the display.

Press

to prevent interruptions. The DND

light goes on and the screen display includes

DND

Press

again to resume normal call alerts.

The DND light goes off and the screen no longer
shows

DND

When this feature is activated, callers from within your
phone system will hear long beeps.

984CIB_(Rev3)28.04.06 4/28/06 6:28 PM Page 60

Содержание 984


















































































































































Результаты поиска

Содержание 984

Отзывы:

AT&T 984, Руководство пользователя, Страница: 66 / 145

Результаты поиска

Содержание 984

Отзывы: