Store a pause in a one touch entry
You can include a pause while storing a dialing sequence
which requires one during actual dialing.
While you are entering the number to be stored, the
screen display includes
PAUSE
.
Press
E
where you want to store a pause. Each
pause counts as one digit. Continue storing the number
as usual.
Store temporary touch tone signals in a
one touch entry
If you have dial pulse (rotary) service, you can store a
dialing sequence which includes the touch tone signals
required for some special services.
While you are entering the number to be stored, the
screen display includes
PAUSE
.
When you want to begin storing temporary tone signals,
press
-
until the screen display includes
TONE
, then press
E
. All numbers you enter after this will send touch
tone signals during dialing.
Store a flash in a one touch entry
You can store the flash signal required by some special
services as part of a dialing sequence.
While you are entering the number to be stored, the
screen display includes
PAUSE
.
When you want to enter a flash signal, press
-
until
the screen display includes
FLASH
, then press
E
.
Continue storing the number as usual.
57
One touch operation
One touch operation
i
i
i
i
i
l
l
l
l
l
974CIB_06 4/7/06 3:33 PM Page 57