Wall installation
continued from page 17
•
Two two-line jacks
(To use this illustration option, you may
want to use the short line cord for lines 1 and 2.)
7.
Initialization.
If no battery is installed when you connect the power cord,
the phone runs a quick self-test and the screen displays
Initializing
for about three seconds.
NOTE:
The phone will run through this same initialization any time it
is reconnected to AC power if a working battery is not installed (for
example, after a power failure or when the unit has been unplugged).
8.
Check for dial tone.
Lift the handset and listen for a dial tone. If you cannot hear a dial
tone, turn to In case of difficulty beginning on page 88.
18
Installation
Installation
Modular
telephone jack
lines 3 and 4
Modular
telephone jack
lines 1 and 2
Standard
electrical
outlet
Power
adapter
974CIB_06 4/7/06 3:32 PM Page 18