Connect the handset to the telephone.
Plug the coiled handset cord into the handset jack on the left side of the
telephone base. Plug the other end of the coiled cord into the handset, then
hang up.
4.
Check for dial tone.
Lift the handset and listen for a dial tone. If you cannot hear a dial tone,
press
VOLUME
. If you still do not hear a dial tone, see the
Troubleshooting
section on pages 30-3 of user’s manual.
Your telephone will work immediately after installation using the default
feature settings (see default settings of the
Feature summary
on page in
the user’s manual).
5.
NOTE:
If you subscribe to caller ID services from your local telephone
service provider, you must follow the instructions in
Set home area code
(see
page of user’s manual), for your phone to properly recognize and dial calls
from the call history list. You may also need to check
Set local area code
(see page of user’s manual) if you want the telephone to recognize
multiple area codes.
LOWER
